Welcome, Guest.

Recent Posts

Pages: [1] 2
1
Egreat A10 / Re: Egreat A10 4K UHD Media Player
« Last post by ltworf13 on September 03, 2017, 06:05:53 PM »
This box is awesome. It's the first Android box that plays true audio passthrough for DTS-HD-MA 7.1 and TrueHD right within Kodi. No wrapper required.
2
KodiLoaded News / Re: kdlinks
« Last post by Derek on July 05, 2017, 12:48:37 PM »
I have reposted the only firmware i have for both the A200 & A300 boxes, There will be no further releases on either box, I no longer own them anymore.
3
KdLinks A200 & A300 / KdLinks A200 ORIG FIRMWARE & UPDATE
« Last post by Derek on July 05, 2017, 12:47:15 PM »

Copy firmware file "KdLinks_A200_update_GMS_V4_00_14121618.tzbird"  To a USB flash drive.

On A200, use file manager open this firmware file, it will then do fimrware update automatically. If you got any failure msg, just restart player and do it again.



It fixed several issues:

1. >>| button mapping has been corrected so now you can jump to next chapter by using this button. That's the biggest complaint we received for A200.

2. 3D ISO better support, they included some enhancements for 3D ISO playback

3. Memory Usage Optimized, they did some changes in the firmware so it can released unnecessary memory and provide better performance.


https://drive.google.com/open?id=0B4otF-iFi7U2X09URFFsOXhMNDQ

Derek

KodiLoaded.com
4
KdLinks A200 & A300 / KdLinks A300. 14-DEC-2015. FACTORY FIRMWARE HMD-3.0.3
« Last post by Derek on July 05, 2017, 12:43:07 PM »

KdLinks A300. 14-DEC-2015. FACTORY FIRMWARE HMD-3.0.3 

Changelog:

1. Can set the browsed picture as wallpaper
2. Can set default subtitle and default audio track
3. Solve the issue of filelist disorder in the Media Center
4. Optimize the UI of the Media Center
5. Add function of copy, rename, erase in the File Manager
6. In My Apps optimize loadtime, support mouse scroll wheel operation
7. Optimize the info display in the Ethernet Settings
8. Other general performance improvements


Installation Instructions:
1. Copy update.zip to the root of a Fat32 Formatted USB pen drive (so the USB pen drive should contain a single file named update.zip.
2. Insert the USB pen drive into any USB port of the KdLinks A300.
3. With the KdLinks A300 turned off, use a paper clip or pen to press and hold  the reset button on the back of the KdLinks A300.
4. While keeping the reset button pressed, turn on the KdLinks A300.
5. Keep the reset button pressed until you see an Android droid logo.
6. Release the button and the firmware upgrade will proceed.
7. The box will auto-reboot when finished.

First boot can take few minutes, just wait...
This will wipe all your settings and apps from the system and start clean.

https://drive.google.com/open?id=0B4otF-iFi7U2ZUlUR3JxVklDZGM

Derek.
5

A big thanks to CS for all his work


KdLinks A300 CUSTOM FIRMWARE ROOT HMD-3.0.3 - August 6-2016 App Refresh


1. Can set the browsed picture as wallpaper
2. Can set default subtitle and default audio track
3. Solve the issue of file-list disorder in the Media Center
4. Optimize the UI of the Media Center
5. Add function of copy, rename, erase in the File Manager
6. In My Apps optimize load-time, support mouse scroll wheel operation
7. Optimize the info display in the Ethernet Settings
8. Other general performance improvements




Add/Update:

- AdAway 3.1.2
- All In One Toolbox Pro 6.4.1
- Advanced Task Manager Pro 6.0.8
- Side Apps Bar - Edge Sidebar+ 4.1
- MobDro 2.0.12
- ShowBox 4.69 (90)
- CinemaBox 2.1.0 (7)
- Terrarium TV 1.2.7
- UkTVNow 5.2
- Pandora 7.2.1 Patched Unlimited skip, No Ads, Download MP3
- Spotify Patched 5.1.0.849
- Venus in HD Gyro 3D XL Live Wallpaper
- NOAA Weather Unofficial (Pro)
- MX Player Pro 1.8.4
- CCleaner
- tinyCam Monitor PRO 6.7.9
- Nova Launcher Prime 4.3.1
- Top TV Launcher Pro 2.90
- Adobe flash 11.1.115.81
- ES File Explorer 4.0.4.9
- Google Play Store 6.3.16
- Google Play Services 8.7.03
- Google Chrome Browser
- OgYouTube 2.0
- Plex 3.8.4.296
- Power Menu 1.0
- HiMedia Wrapper
- KLMC 16.1 ( Kodi )
- Super SU Pro 2.7.6


Installation Instructions:

1. Copy update.zip to the root of a Fat32 Formatted USB pen drive (so the USB pen drive should contain a single file named update.zip.
2. Insert the USB pen drive into any USB port of the KdLinks A300.
3. With the KdLinks A300 turned off, use a paper clip or pen to press and hold  the reset button on the back of the KdLinks A300.
4. While keeping the reset button pressed, turn on the KdLinks A300.
5. Keep the reset button pressed until you see an Android droid logo.
6. Release the button and the firmware upgrade will proceed.
7. The box will auto-reboot when finished.

First boot can take few minutes, just wait...
This will wipe all your settings and apps from the system and start clean.


FIRST STEP AFTER FIRST BOOT

Go to apps load Super SU, Agree to SU Request, Install Binaries in Normal Mode, Reboot.


REMOVE ADS FROM MOBDRO ETC ETC.

Go to apps, Load AdAway, Agree to SU Request, Click Download files and apply ad blocking, Reboot.

YOUR DONE  ENJOY !



ADDITIONAL NOTES !

DOWNLOAD FROM PANDORA

Once in Pandora if you want to download a song your listening to click on the thumbs up icon bottom of screen

ENABLE ROOT BROWSING IN ES FILE EXPLORER

Load Es File Explorer, Left Column click tools, Tick Root Explorer, Agree to SU request & Tick Show hidden files

https://drive.google.com/open?id=0B4otF-iFi7U2ZVVicEJBNFNVWVk

Derek.
6
KodiLoaded News / Re: kdlinks
« Last post by Mcclenton on July 04, 2017, 08:37:12 AM »
Right, would be good if someone could repost.
7
KodiLoaded News / kdlinks
« Last post by Typhoon1952 on July 03, 2017, 09:30:39 PM »
I am here due to the links that I saw on the web concerning custom firmware for the kdlinks media players.  Is there any chance that they can be reposted?
8
Himedia A5 / KodiLoaded Himedia A5 Custom TWRP Root HMD-2.0.4 2017-03-14.102529
« Last post by Derek on June 29, 2017, 07:46:01 PM »
KodiLoaded Himedia A5 Custom TWRP Root HMD-2.0.4 2017-03-14.102529

This is a custom Fully Rooted TWRP Backup


IF YOU DO NOT KNOW WHAT ROOT IS DO NOT USE THIS FIRMWARE, HIMEDIA WILL NOT SUPPORT 3RD PARTY OR ROOTED FIRMWARE USE AT YOUR OWN RISK


Removed:

- InnerHitv.apk
- HiChannelTV.apk
- HiStatistics.apk - post user apps list to HiMedia server
- OTA Update
- Navbar ( Disabled in build.prop can be enabled )
- Skype
- Wifi Analyzer
- Happycast


Update:

Google play
Google play services

Add:


- Adaway
- All in one toolbox pro
- AppLock
- Black & blue Icons
- Chrome
- Es file explorer pro
- Galaxy live wallpaper pro
- Sunset hill live wallpaper pro
- Kodi 17.3 ( Kodimaster Build v5 )
- Mobdro
- Mx player pro
- NOAA weather
- Nova launcher prime
- Pandora ( Unlimited skip no ads )
- Teamviewer QS
- Scanner radio pro
- Spotify Mod
- SuperSU 2.82 Pro
- Terrarium TV
- Tune in radio pro
- UkTVNow




















Instructions:

( TWRP REQUIRES YOU EITHER USE A PC MOUSE OR AIRMOUSE )

1: Copy recovery.img and TWRP folder to USB thumb drive or SD Card.

2: Unplug the power plug from your A5, Insert USB Drive or SD Card into your A5, Take a paperclip or toothpick hold down the reset button, Plug in the power cable, After you see the Himedia logo on your tv count to ten and release the reset button, Your A5 will now boot into TWRP Recovery, Click on restore, Choose the backup file on your media, Swipe to restore.

NOTE: If you have already upgraded to firmware v-2.0.5 this will not work, You must first downgrade to 2.0.4.

Derek.



DOWNLOAD
   https://mega.nz/#!eNxRnLxZ!eQxspptk60ad5Zc4SWQ755cR_KfKnyOUOG5hSQhgOnQ




9
Foscam / Foscam R2 Indoor 1080P FHD Wireless "Plug and Play" IP Camera
« Last post by Derek on June 26, 2017, 04:55:57 PM »
I have owned many Foscam models and this is so far my favorite, Within minutes of unpacking we were up and running, Initial

setup is a breeze, Overall feel and build quality seems better than previous models

Because it can turn 300 degrees horizontally and 100 degrees vertically. This enables the device to record from many

different angles, removing the need to get a bunch of different cameras for a single room. Just one Foscam R2 camera

positioned correctly is able to keep an eye out on an entire room.

The front of the R2 has the rotating camera lens that is surrounded by infrared LED's for night vision. There’s also a

microphone located along the bottom edge of the device for 2 way audio.

On the back of the R2, you’ll find a speaker, power port, Ethernet port with status LED's, and a WiFi antenna.

On the left side there’s a micro SD card slot that can be used to store motion alert video clips, manually captured images

and video, And on the right side is a WPS reset button.

The base of the Foscam R2 has a threaded socket that can be used to attach the camera to a wall or ceiling using the

included mounting hardware.


What’s in the box?

- Foscam R2 IP camera
- Detachable WiFi antenna
- Mounting Bracket
- Power Adapter with 10 Foot power cord
- Quick installation guide
- Warranty card
- Installation/Manual CD


PROS:
- Price
- Easy Setup
- Works well with Android & IOS
- Decent Support with Bountiful User Forums
- Zoom ( Disable WDR )
- Wide angle of view
- Great image quality
- Lots of Customizable settings
- Clean UI
- 10 Foot power cable ( Increased from old 6 Ft )
- Works great with Blue Iris


CONS:
- Firmware still early release few bugs but nothing that would stop me purchasing
- 1080p Limited to 25Fps
- Intermittent WIFI Connectivity Issues ( Could use Higher Gain WIFI Antenna )
- WDR Setting becomes unresponsive until reboot frequently
- Information based on Firmware ( 2.71.1.18 )

Overall I am very happy with this camera and find it will be a fine Upgrade to my Foscam FI9831P V2
For the money I just don't see how you can do any better, Foscam works hard knocking the bugs out in new
firmware releases so I am confident we will see an improvement very soon with the next update.

Let my Video demo tell the story.



I received this item at a discount in exchange for an HONEST review.


Derek.J
10
Egreat A10 / Egreat A10 4K UHD Media Player
« Last post by Derek on June 08, 2017, 12:16:57 PM »
Model: A10
Case Material: Aluminum alloy with wire drawing process
Color: Black



Whats in the box:

1 x A10 UHD Media Player
1 x IR remote control
1 x AC power cable
1 x SATA cable
1 x HDMI cable
1 x AV cable
1 x User Manual

Specifications:

OS: Google Android 5.1.1
CPU: Hi3798CV200 Quad core ARM Cortex-A53 up to 2.0GHz, ARMv8-A architecture with multimedia accelerator engine Neon, build in hardware JAVA accelerator and hardware floating point coprocessor
GPU: Built in ARM Mali-720 3D GPU, OpenGL ES 3.1/3.0/2.0/1.1/1.0 and OpenVG 1.1 support, OpenCL 1.2/1.1 full profile/RenderScript support, Microsoft DirectX 11 FL9_3 support, ASTC(Adaptive Scalable Texture Compression) support, Pixel fill rate is greater than 2.7Gpix/s, Triangle up to 280Mtri/s, Floating point operations up to 103GFLOPS
RAM: 2GB DDR3
ROM: 16GB Flash
LAN: 10/100/1000M RJ45 adaptive ethernet
WiFi: 802.11 b/g/n/ac 2.4G/5G Wi-Fi
Bluetooth: BT4.0



Interface:

1 x 3.5' HDD tray
1 x SATA
1 x USB 3.0 host
1 x USB 2.0 host
1 x RJ-45 Ethernet Jack (10/100/1000Mbps)
1 x HDMI2.0a(up to 4K2K 60fps output)
1 x Optical SPDIF, 1 x Coaxial
1 x AV
1 x AC in Jack (110~220V 50/60Hz)
1 x Cooling fan
1 x RS232
1 x Power switch
1 x LED White-Light dot matrix panel, 1 x Power LED indicator



Media Support:

File System: EXT3, EXT4, FAT16, FAT32, NTFS, GPT
Video Decoder: HiVXE2.0 video decode engine
H.265/HEVC Main/Main10 profile@Level5.1 Hight-tier, 4Kx2K@60fps and 1x1080p@30fps parallel decoding
H.264 AVC BP/MP/HP@L5.1, H.264/AVC MVC up to 1080p@30fps
VP9 up to 4Kx2K@60fps
VP6/8 up to 1080p@60fps
MPEG1 up to 1080p@60fps
MPEG-2 SP@ML,MP@HL, up to 1080p@60fps
MPEG-4 SP@L0-3,ASP@0-5, support GMC, support Short-Header format, up to 1080p@60fps
AVS JiZhun Profile@6.0, AVS-P16(AVS+), up to 1080p@60fps
VC-1 SP@ML, MP@HL, AP@L0-3, up to 1080p@60fps
Video Formats    MKV, ISO, MP4, AVI, MOV, MPG, MPEG, WMV, DAT etc.
Graphics and Display Processing : HDR 10 support
Subtitle: SRT, SSA, PGS, SMI
Audio Decoder: MPEG L1/L2
Dolby Digital/Dolby Digital Plus Decoder-Converter
Dolby True HD
DTS HD/DTS M6
Dolby Digital/DTS pass throught
AAC-LC, HE AAC V1/V2
APE/FLAC/OGG/AMR-NB/WB
G.711(u/a)
Dolby MS12 decode & sound effect
HE-AAC transcoding DD(AC3) support
Audio Formats: APE, FLAC, WAV, AAC, WMA, MP3, AMR, MID, OGG etc.
Picture Decoder: Full HD JPEG hardware decoding up to 64 million pixels
PNG hardware decoding up to 64 million pixels
Picture Formats: JPG, JPEG, PNG, BMP etc.
Language: English, Simplified Chinese etc (will add new languages according to user needs)

Main Menu ( Launcher )



Selecting the Video, Music, Photo and All Files buttons will take you through to a screen which contains range of content sources that you can browse in order to access your content. You are able to access USB media, search network shares and add and browse Samba and NFS servers, As well as all your system settings.




















One of the best features of the Egreat A10 is the ability to browse full Bluray menus for Bluray ISO’s that you own. The A10 is one of the few media players out there that can do this and do it well.







The A10 Automatically downloads movie posters from the internet for you




Did I mention the fully Back-lit remote







Egreat A10 OTA Updates:

The Egreat A10 supports OTA updates which is great. In order to update Android boxes you generally need to load the latest firmware on an SD card or USB and then manually flash the latest update.

With OTA updates you can simply click the check for updates button and if there is an update Just hit the download and install button and the Egreat A10 will take care of the rest.




Click Here For Model & PCB Gallery


Derek.

Pages: [1] 2